Flush-mounted outlet diagonal IP21 Exxact
2S/16A/IP21 DIAG ANT
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
Exxact 2-outlet diagonal. Used with frames equipped with an adapter (Combi).
Datasheets(X)
Model | Protective contact CEE 7/3 / CEE 7/4 (type F) |
Protective contact | Yes |
Protective earth pin round | No |
Number of active contacts (round) | 0 |
Number of active contacts (flat) | 0 |
With signal lamp | No |
With built-in USB power supply | No |
Number of units | 2 |
Number of modules (module system) | 0 |
Number of socket outlets switchable | 0 |
Number of phases | 1 |
Connection type | Push-in clamp |
With hinged lid | No |
With enhanced contact protection | Yes |
Label space/information surface | No |
Colour | Anthracite |
Transparent | No |
Lockable | No |
Eject-mechanism | No |
Insulated mounting | No |
With function lighting | No |
With orientation lighting | No |
Over voltage protection | No |
Fault current protection | No |
With miniature fuse | No |
Special power supply | No special power supply |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | Yes |
Surface protection | Lacquered |
Surface finishing | Matt |
Anti-bacterial treatment | No |
With on/off switch | No |
With loop through function | Yes |
Rotated central insert | Yes |
Nominal current | 16 A |
Nominal voltage | 250 V |
Frequency | 50-60 Hz |
Suitable for degree of protection (IP) | IP21 |
Device width | 71 mm |
Device height | 71 mm |
Device depth | 38.9 mm |
Min. depth of built-in installation box | 22.3 mm |
