Pave Pillar Surge Protection Device
ACCESSORIES PAVE SURGE PROTECTOR 10KV
HIDE-A-LITE
With registration you can access the Würth Elektro online shop selection.
Pave Pillar has 4kV surge voltage protection as standard. This is a 10kV surge protector for extra protection.
Datasheets(X)
Nominal voltage AC | 275 V |
Nominal voltage DC | 388 V |
Nominal load current | 7 A |
Total discharge current (8/20) (L+N-PE) | 5 kA |
Voltage protection level L-PE/N-PE | 10 kV |
Max. overcurrent protection device, parallel connection (fuse) | 16 A |
Number of poles | 5 |
Max. conductor cross section solid (solid, stranded) | 1.5 mm² |
With remote signalling contact | No |
Signalling at the device | None |
Degree of protection (IP) | IP65 |
Last viewed
Spacer ring Multifix KKR1.5
Wire suspension set WS, Unipro
Cable clamp KP
Combination thermostat EB-THERM 205
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Defogger Adax Neo
LED power source 12V IP20 standard FTLight
Motor protection switch TeSys GV2
Rivet nut
Spacer screw SIUL MSNI