Gypsum plasterboard anchor W-GS type ZD
Die-cast zinc. For quick and easy gypsum plasterboard and fibrous plaster mounting without pre-drilling or special installation tools
ANCHOR FOR PLASTER BOARD
With registration you can access the Würth Elektro online shop selection.
- High-quality die-cast zinc
- Fixed with a shape-based locking mechanism
- Quick to install with a power drill and a compatible bit; no special installing tools or boring needed.
- The patented head enables anchor mounting with a PZ, AW, or TX bit while the hex head equalises stress.
- The patented twist lock is activated on screw-in. When removing the screw, the gypsum plasterboard anchor stays still in the anchor surface instead of following the motion.
- Only a little space needed behind the board (15 mm)
- The component can be fixed with a wood or chipboard screw.
- The gypsum plasterboard anchor and the screw can be installed with the same tip
- Easy setting and board penetration with the innovative centering tip.
- We recommend the ASSY-D screw for installation
- Fix the component with a 4.5 mm diameter ASSY® D screw or a wood/chipboard screw without a drill point, counterthread, or ring thread.
- Usable in humid spaces with stainless steel screws
- Type Z/L is recommended for double boards
Datasheets(X)
Anchor length (l) (l) | 33 mm |
Material | Die-cast zinc |
Required particle-board screw diameter | 4.5 mm |
Hole diameter in component (d Bau) | 6.5 mm |
Minimum component thickness (d) | 9.5 mm |
Max. attachment height (d a) - condition (da) | Dependent on screw length |
Min. temperature resistance | -40 °C |
Max. temperature resistance | 80 °C |
Edge clearance (a r) | 50 mm |
Centre-to-centre distance (a) | 100 mm |
Last viewed
Outlet 709-581
Slotted screw ISO 14580
Slotted screw countersunk head DIN 965
Corrugated conduit bend JMKL HF
Flush-mounted outlet diagonal IP21 Exxact
Cable routing conduit FT 40 aluminium, Instal
Taptite DIN 7500-M, countersunk head, thread rolling
ENLARGER PA PG/PG Polyamide
Gel joint IP68 Reliseal
Terminal block 2216 series with push-button 3 conductor TOPJOB® S