ASSY® 3.0, blue passivated Chipboard screw
Particularly suited for fastening thin metal sheets to wood.
ASSY 3 PANHEAD 4X40
Art.-no. 0153040040
EAN 4047376867963
With registration you can access the Würth Elektro online shop selection.
Connects wooden parts with no splitting
Asymmetrical thread – fast installation
- Small fastening force
- Great pull-out force
- Faster installation than conventional particle board screws
AW drive – more force
- Optimal power transmission
- Excellent fit
- Fast location
- Screw locates securely
- Screw bit stays in place securely
- No wobbling
- No damage to screw coating
- Only 5 screw tip sizes for 3.0–12.0 mm diameters
Ring thread for less wood splitting and surface damages
- Very little splitting, especially when screwing near edges
- Less fastening force needed
- Next to no surface damages (blow-outs) thanks to the punching effect of the ring thread
The screws are not suitable for outdoor use or for spaces subject to short-term or continuous high moisture levels! Please use ASSY® 3.0 A2 stainless steel screws in these cases.
ASSY 3.0 chipboard screws are optimised for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. Therefore, we recommend only using screws without optimised thread tips (e.g., drill bit, counterthread, ring thread, serrated edge, self-clearing groove). These include screws designed for plastic dowels, DIN 571 compliant hexagon wood screws, and Wüpofast screws.
Working documents available:
More detailed loading data can be found in the ETA approval. See our service page for more details www.wurth.fi/fi/wurth_fi/palvelut_1/dokumentaatiot/kiinnitystarvikkeet/kiinnitystarvikkeet.php. For designers www.wurth.fi/palvelut – > The Würth ASSY screw dimensioning software.
ETA-11/0190
ETA-11/0190 approval necessary when using these screws.
Datasheets(X)
 | |
Notice | The screws are not suitable for outdoor use or for spaces subject to short-term or continuous high moisture levels! Please use ASSY® 3.0 A2 stainless steel screws in these cases. ASSY 3.0 chipboard screws are optimised for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. Therefore, we recommend only using screws without optimised thread tips (e.g., drill bit, counterthread, ring thread, serrated edge, self-clearing groove). These include screws designed for plastic dowels, DIN 571 compliant hexagon wood screws, and Wüpofast screws. Working documents available: More detailed loading data can be found in the ETA approval. See our service page for more details www.wurth.fi/fi/wurth_fi/palvelut_1/dokumentaatiot/kiinnitystarvikkeet/kiinnitystarvikkeet.php. For designers www.wurth.fi/palvelut – > The Würth ASSY screw dimensioning software. |
