Auxiliary contactor DX3 Legrand
AUX. OR FAULT SIGN. CONTACT TX & DX LEG
LEGRAND
With registration you can access the Würth Elektro online shop selection.
For line protection switches and residual-current devices; installed on the left side of DX3 and TX3 devices. Busbar installed from above. The auxiliary contactor can be connected to the main component without tools.
Datasheets(X)
Device fitting | Universal |
Additional equipment | Auxiliary switch / fault-signal switch |
Attached at delivery | No |
Number of contacts as normally open contact | 0 |
Number of contacts as normally closed contact | 0 |
Number of contacts as change-over contact | 1 |
Number of fault-signal switches | 0 |
Rated switch current | 6 A |
Rated voltage | 240 V |
Voltage type for actuating | AC/DC |
With auto test for earth leakage function | No |
Suitable for max. number of poles main contact unit (total) | 4 |
Suitable for max. current main contact unit | 125 A |
Brand | LEGRAND |
Last viewed
LED strip 12V IP20 Prime Strip
Staple Type 90
Plastic rivet black TRSR
Through standoff WESO
Auxiliary contactor TeSys
Hexagon socket screw, cylinder head
Circuit board support TRMDLSP3
Cable routing conduit aluminium, Instal
Serrated lock washer/disk, externally serrated, type A
Hexagon socket screw, flat cylinder head