Choke BSN
BALLAST BSN 100 K202-A2-TS 230V 50Hz
With registration you can access the Würth Elektro online shop selection.
Heat-protected magnetic choke for high-pressure sodium and multi-metal lamps. To be used with a series igniter, see diagram of use of igniters.
Datasheets(X)
Model | Conventional |
Multiwatt model | No |
Dimming 0-10 V | No |
Dimming 1-10 V | No |
Dimming DALI | No |
Dimming DMX | No |
Dimming potentiometer (integrated) | No |
Dimming GPRS | No |
Dimming LineSwitch | No |
Dimming manufacturer's proprietary system | No |
Dimming mains voltage modulation | No |
Dimming phase cut-off | No |
Dimming phase cut-on | No |
Dimming programmable | No |
Dimming RF | No |
Dimming Sine Wave Reduction | No |
Dimming Touch and Dim | No |
Dimming Zigbee | No |
Dimming with push-button | No |
No dim function | Yes |
For lamp type HI | Yes |
For lamp type HM | No |
For lamp type HS | Yes |
For lamp type LS | No |
For lamp type T7 | No |
For lamp type T16 | No |
For lamp type T16-R | No |
For lamp type T26 | No |
For lamp type T38 | No |
For lamp type T-R | No |
For lamp type T-U | No |
For lamp type TC-D | No |
For lamp type TC-DD | No |
For lamp type TC-DEL | No |
For lamp type TC-F | No |
For lamp type TC-L | No |
For lamp type TC-QEL | No |
For lamp type TC-S | No |
For lamp type TC-SEL | No |
For lamp type TC-T | No |
For lamp type TC-TEL | No |
Suitable for lamp power (1 lamp) | 100-100 W |
Suitable for number of lamps | 1-1 |
Suitable for lamp power | 100-100 W |
Nominal voltage | 230-230 V |
Housing | Metal housing |
With strain relief | No |
Length | 123 mm |
Width | 61 mm |
Height | 52 mm |