Blind rivet domed head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2 4,8X10
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter (d) | 4.8 mm |
Length (l) | 10.0 mm |
Head diameter (d) | 9.0 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 4.0-6.0 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 4000 N |
Tensile fracture load | 5000 N |
Nominal diameter x length (Ø d x l) | 4.8 x 10.0 mm |
Last viewed
Circuit board support TRRLCBSK2
Bending spring EL-SAR VETARI
Cable gland, brass
Cable tie lockable natural TRLWS 2
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Plastofast, pan head with flange
Post luminaire IP65 Pave Post Top Deco II
LED strip profile cap LS
Wall luminaire
Press-in screw WEFH4