Blind rivet domed head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 4,8X10
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter (d) | 4.8 mm |
Length (l) | 10.0 mm |
Head diameter (d) | 9.0 mm |
Head height (k) | 1.6 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 4.0-6.0 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 4000 N |
Tensile fracture load | 5000 N |
Nominal diameter x length (Ø d x l) | 4.8 x 10.0 mm |
Last viewed
Circuit breaker
Cable trunking, coupling DLP-S for DLP-S cable channel
Safety label 793 series, WMB, WAGO
Cable tie with stand natural TRSHK-M
Circuit board support TRBHL1
Cable gland cable feed through, polyamide
Switchgear panel flush IP30 Setter
Feeder cable LS AY VAL-CP
Lighting rail cover CS3, Unipro
Circuit breaker Acti 9 iC60N