Blind rivet domed head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 4,8X16
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
 | |
Nominal diameter (d) | 4.8 mm |
Length (l) | 16.0 mm |
Head diameter (d) | 9.0 mm |
Head height (k) | 1.6 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 9.5-11.0 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 4000 N |
Tensile fracture load | 5000 N |
Nominal diameter x length (Ø d x l) | 4.8 x 16.0 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Cable routing conduit aluminium, Instal
Heater mat Thermoflex 120
Cable-in conduit Aalto 20HF ML
Heat shrink joint kit Ensto
Surface-mounted junction box AP9 IP65, plastic
Silicone cable SIHF
Ceiling bracket CB3, Unipro
Surface-mounted junction box AP10 IP65, plastic
ENLARGER PA M/M Polyamide
Surface-mounted luminaire IP65 Ledinaire Wall-mount