Blind rivet domed head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 4,8X8
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter | 4.8 mm |
Length | 8 mm |
Head diameter | 9 mm |
Head height | 1.6 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 2.0-4.0 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 4000 N |
Tensile fracture load | 5000 N |
Nominal diameter x length | 4.8 x 8.0 mm |
Last viewed
Grommet, thin KLIKSEAL®
Office luminaire Linear IndiviLED Direct/Indirect
Call push-button with pull string, flush IP20 Exxact
Blind rivet domed head open
Through standoff WESO
Flange bolt, hexagon head, lock toothing
Enclosed industrial luminaire Damp Proof Slim Value, IP65
Hexagon socket screw, cylinder head
3-phase conductor rail system MS
Installation conduit JM Wavin