Blind rivet domed head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 4X16
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter | 4 mm |
Length | 16 mm |
Head diameter | 8 mm |
Head height | 1.3 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 10.0-12.0 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 2700 N |
Tensile fracture load | 3500 N |
Nominal diameter x length | 4.0 x 16.0 mm |
Last viewed
Wire end ferrule insulated For two conductors
Cable routing conduit end component Thorsman
Plastic cabinet Atlantic
Downlight IP23 Spot Air Adjust
Lock nut, locking part (fully metal)
Power supply CP-C.1
Locking plate/snap ring for shafts without groove
End component P Instal
Motor protection switch MPX3 32H
CABLE GLAND HSK-M-EMV MS