Blind rivet countersunk head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 COUNTERS. 3,2X6
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 6.0 mm |
Min./max. grip range | 1.5-3.0 mm |
Head diameter | 6.3 mm |
Head height | 1.0 mm |
Head angle | 120 Degree |
Nominal diameter | 3.2 mm |
Length | 6.0 mm |
Mandrel diameter | 2.1 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1900 N |
Tensile fracture load | 2500 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Motor protection switch MS116
Circuit breaker Acti 9 iC60N
Downlight Downlight Slim, IP20
Connected Energy Meter with Netatmo
Pipe clip VBS 605 OBO
Plastofast, pan head
Downlight Downlight Comfort, IP54
Electronic transformer HTM
Flange bolt, hexagon head
Cable tie anchor CTM-set, Hellermann PA, screw fastening, Black