Blind rivet countersunk head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 COUNTERS. 3,2X8
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 8.0 mm |
Min./max. grip range | 3.0-5.0 mm |
Head diameter | 6.3 mm |
Head height | 1.0 mm |
Head angle | 120 Degree |
Nominal diameter | 3.2 mm |
Length | 8.0 mm |
Mandrel diameter | 2.1 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1900 N |
Tensile fracture load | 2500 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Rev Block TeSys - LU2MB0BL
IP55 equipment cabinet Ebeco
Vehicle protecting tube PAER
Enclosed industrial luminaire IP65 Liteline
Instrumentation cable REDAK HF
Limit switch cable feed through OsiSense
Motor protection switch MPX3 32H
Switchgear panel flush/surface IP20 Delta
Decorative front for indoor use Pixo
Single-phase residual current device IP44, type F