Blind rivet countersunk head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 COUNTERS. 4,8X12
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 12.0 mm |
Min./max. grip range | 6.0-8.0 mm |
Head diameter | 9.5 mm |
Head height | 1.4 mm |
Head angle | 120 Degree |
Nominal diameter | 4.8 mm |
Length | 12.0 mm |
Mandrel diameter | 3.1 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 4000 N |
Tensile fracture load | 5000 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Circuit board support TRDLMSP
CONDUCTOR TAG STRIP 0.5–1.5 MM2 Black letters on a yellow background
Beam clamp VBS-BCVH
Serrated lock washer pair Wide model
Spacer peg SISI MSNI
Wall bracket VK hot dip galvanised, Meka
Installation conductor H07V2-K MKEM 90
Terminal block TOPJOB 2006 series 2 conductor GNYE TOPJOB® S
Ceiling bracket HK1 hot dip galvanised, Meka
Surface-mounted switch IP21 Impressivo