Blind rivet countersunk head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 COUNTERS. 4X8
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 8.0 mm |
Min./max. grip range | 2.5-4.5 mm |
Head diameter | 7.5 mm |
Head height | 1.1 mm |
Head angle | 120 Degree |
Nominal diameter | 4 mm |
Length | 8 mm |
Mandrel diameter | 2.4 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 2700 N |
Tensile fracture load | 3500 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Reception connector AL 13
Spacer screw SIUL ZN
Pipe clip VBS 2955 OBO
Blind rivet half round head open
Hexagon screw, full thread
Remote control High Bay Gen 4
Auxiliary contactor 1S,1A
Motion and twilight detector High Bay Gen 4
Spacer peg SISI MSNI
Hexagon socket screw, flat cylinder head, centre hole