Blind rivet domed head open
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 DOME 4X6
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter (d) | 4 mm |
Length (l) | 6 mm |
Head diameter (d) | 7.5 mm |
Head height (k) | 1.0 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
RoHS-compliant | Yes |
Min./max. grip range | 2.0-3.0 mm |
Shear-fracture load | 1900 N |
Tensile fracture load | 2500 N |
Nominal diameter x length (Ø d x l) | 4 x 6 mm |
Head type | Truss head |
Last viewed
Slotted cable trunking with cut-off groove HF Transcab Legrand
Flangeless Sonic-Sert
Heat shrink hose with adhesive: FRG8003
Flush-mounted switch 10AX – 250V IP20 Valena Life
Signal cable FLEX-JZ-CY
Line protection switch Acti 9 IC60H
Enclosed industrial luminaire Damp Proof Slim Value, IP65
Blind rivet domed head open
Through connector Ouneva
Mounting plate MNX