Blind rivet domed head closed
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET A2/A2 SEALED 4,8X9,5
With registration you can access the Würth Elektro online shop selection.
- For applications requiring a sealed connection where the feed shaft must not come loose.
- Dust and pressure proof.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter | 4.8 mm |
Length | 9.5 mm |
Head diameter | 9.8 mm |
Head height | 1.7 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 1.0-4.0 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 4000 N |
Tensile fracture load | 4400 N |
Nominal diameter x length | 4.8 x 9.5 mm |
Last viewed
Residual current device outlet, flush IP44, Kosti
Slotted screw Pan head ISO 14583
Lighting rail T33, Unipro
Plastofast, pan head
Serrated lock washer/disk, externally serrated, type A
Circuit breaker
Cable-in conduit Aalto 20HF ML
Digital time switch multi-purpose daily/weekly programme Legrand
Motor protection switch MS116
Circuit board support TRTCBS