Blind rivet half round head open
Rivet: aluminium AlMg 3.5. Mandrel: Stainless steel A2
BLIND RIVET AL/A2 3,2X10
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 10.0 mm |
Min./max. grip range | 5.0-7.0 mm |
Head diameter | 6.4 mm |
Head height | 1.0 mm |
Nominal diameter | 3.2 mm |
Length | 10.0 mm |
Mandrel diameter | 1.8 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 750 N |
Tensile fracture load | 1100 N |
Material of sleeve | Aluminium, AlMg 3.5 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Equipotential bonding busbar AM5
Concrete curing cable BHS
Dimmer switch NOCTURNE
Analogue time switch Legrand
RUBBER SEAL PG Perforated
Snow melting mat Ebeco Snowmat
Hexagon socket screw, cylinder head
Cable-in conduit Aalto 20HF ML
Hexagon screw, countersunk head, zinc plated
Open industrial luminaire IP23 Low Bay FLEX