Blind rivet half round head open
Rivet: aluminium AlMg 3.5. Mandrel: Stainless steel A2
BLIND RIVET AL/A2 4,8X12
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 12.0 mm |
Min./max. grip range | 6.0-8.0 mm |
Head diameter | 9.5 mm |
Head height | 1.5 mm |
Nominal diameter | 4.8 mm |
Length | 12.0 mm |
Mandrel diameter | 2.65 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 1850 N |
Tensile fracture load | 2600 N |
Material of sleeve | Aluminium, AlMg 3.5 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Hexagon socket screw, cylinder head
Vehicle protecting tube PAER
Constant voltage LED driver 12V FTLight
Circuit board support TRMDLSP1
Heater mat Thermoflex Kit 500
Wing repair washer, large outer diameter
Heater mat Thermoflex 120
Spring lock washer DIN 127-B ST
Hexagon socket screw, cylinder head
Wall luminaire IP44, Dana FTLight