Blind rivet half round head open
Rivet: aluminium AlMg 3.5. Mandrel: Stainless steel A2
BLIND RIVET AL/A2 4X8
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 8.0 mm |
Min./max. grip range | 3.0-5.0 mm |
Head diameter | 8 mm |
Head height | 1.4 mm |
Nominal diameter | 4 mm |
Length | 8 mm |
Mandrel diameter | 2.2 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 1250 N |
Tensile fracture load | 1800 N |
Material of sleeve | Aluminium, AlMg 3.5 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Ceiling bracket TP2-P hot dip galvanised, Meka
Terminal block 2002 series triple-deck 2 conductor TOPJOB® S
Floor heater cable Cableflex
Wiser Exxact motion detector with a 10A relay, Zigbee
Netatmo Plexo outlet
Set screw, hex socket
WÜPOFAST®, blue passivated Chipboard screw
Damp proof Industrial luminaire IP66 Damp Proof Compact Gen 2
Washer, flat, no chamfer
Through connector Ouneva