Blind rivet domed head open
Rivet: aluminium. Mandrel: steel, zinc plated.
BLIND RIVET AL/ST 3,2X10
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 10.0 mm |
Min./max. grip range | 5.0-7.0 mm |
Head diameter | 6.4 mm |
Head height | 1.0 mm |
Nominal diameter | 3.2 mm |
Length | 10.0 mm |
Mandrel diameter | 1.8 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 750 N |
Tensile fracture load | 1100 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Plastofast, pan head
Flush-mounted switch IP21 Exxact
Hexagonal bolt, full thread
Surface outlet box Red Range Q 4-L IP20, plastic
Corner component KS90 hot dip galvanised, Meka
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Surface-mounted junction box AP9 IP65, plastic
Post luminaire IP65 Pave Post Top
Hexagon socket screw, cylinder head
Valena Life with Netatmo outlet