Blind rivet domed head open
Rivet: aluminium. Mandrel: steel, zinc plated.
BLIND RIVET AL/ST 4,8X14
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 14.0 mm |
Min./max. grip range | 8.0-10.0 mm |
Head diameter | 9.5 mm |
Head height | 1.5 mm |
Nominal diameter | 4.8 mm |
Length | 14 mm |
Mandrel diameter | 2.65 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 1850 N |
Tensile fracture load | 2600 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Spacer screw SIUL ZN
Disconnect/test terminal block 2007 series TOPJOB® S
Compact circuit breaker DPX250
CABLE MARKER STRIP 4.0-6.0 MM2 WIC3
Circuit breaker
Flange bolt, hexagon head, lock toothing
Enclosed industrial luminaire Damp Proof Classic, IP65
Tapping screw pan head DIN 7981-C
Damp proof industrial luminaire Damp Proof Classic Emergency, IP65
Cable routing conduit aluminium, Instal