Blind rivet domed head open
Rivet: aluminium. Mandrel: steel, zinc plated.
BLIND RIVET AL/ST 5X8
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 5.0 x 8.0 mm |
Min./max. grip range | 3.0-4.5 mm |
Head diameter | 9.5 mm |
Head height | 1.6 mm |
Nominal diameter | 5 mm |
Length | 8 mm |
Mandrel diameter | 2.65 mm |
Drill hole diameter | 5.1 mm |
Shear-fracture load | 2150 N |
Tensile fracture load | 3100 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Taptite DIN 7500-C, cylinder head, PZ, thread-rolling screw
Motor protection switch MPX3 32H
Flush-mounted outlet IP21 diagonal 2 Exxact
Mount cabinet Nedbox, flush
Neutral bar N bars with 16 mm2 and 6 mm2 pillar terminals KNA
Residual current device outlet, flush IP44, Kosti
Terminal block 2202 series with push-button 2 conductor TOPJOB® S
Wall luminaire IP44, AVR8 eWay
Defrosting cable Ebeco Frostvakt 10
LED strip 24V IP67 LEDStrip Midlum