Blind rivet countersunk head open
Rivet: aluminium AlMg 3.5. Mandrel: steel, zinc plated A1K.
BLIND RIVET AL/ST COUNTERSUNK 3,2X10
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
 | |
Nominal diameter x length | 3.2 x 10.0 mm |
Min./max. grip range | 5.0-7.0 mm |
Head diameter | 6.4 mm |
Head height | 1.1 mm |
Head angle | 120 Degree |
Nominal diameter | 3.2 mm |
Length | 10.0 mm |
Mandrel diameter | 1.8 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 750 N |
Tensile fracture load | 1100 N |
Material of sleeve | Aluminium, AlMg 3.5 |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Illuminated selector switch Harmony
Base 221-Inline Wago
Surface-mounted outlet skirting outlet IP21 Exxact
Disconnect/test terminal block 2007 series TOPJOB® S
Film junction box Red Range
Box cover AK1.1
Equipotential bonding busbar housing PMR576
Washer, flat, no chamfer
Instrumentation cable FRHF PYRO
Halide lamp Powerstar