Blind rivet countersunk head open
Rivet: aluminium AlMg 3.5. Mandrel: steel, zinc plated A1K.
BLIND RIVET AL/ST COUNTERSUNK 3,2X6
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 6.0 mm |
Min./max. grip range | 2.0-3.5 mm |
Head diameter | 6.4 mm |
Head height | 1.1 mm |
Head angle | 120 Degree |
Nominal diameter | 3.2 mm |
Length | 6 mm |
Mandrel diameter | 1.8 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 750 N |
Tensile fracture load | 1100 N |
Material of sleeve | Aluminium, AlMg 3.5 |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Flush-mounted switch 10AX – 250V IP20 Valena Life
Circuit breaker
Power cable CU MCMK Prysmian
Earthing connector KNA Ensto
Air purifier UVC HEPA AIR PURIFIER USB
Illuminated releasable push button Compact
Residual current device outlet, surface IP44, Exxact
LED strip 12V IP65 Prime Strip
Lighting rail TC32F, Unipro
Cover plate 85 mm Valena Life