Blind rivet countersunk head open
Rivet: aluminium AlMg 3.5. Mandrel: steel, zinc plated A1K.
BLIND RIVET AL/ST COUNTERSUNK 4,8X10
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 10.0 mm |
Min./max. grip range | 4.5-6.0 mm |
Head diameter | 9.5 mm |
Head height | 1.8 mm |
Head angle | 120 Degree |
Nominal diameter | 4.8 mm |
Length | 10.0 mm |
Mandrel diameter | 2.65 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 1850 N |
Tensile fracture load | 2600 N |
Material of sleeve | Aluminium, AlMg 3.5 |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Digital time switch multi-purpose daily/weekly programme Legrand
LED reflector lamp PAR16 LED PERFORMANCE DIM 4.5W
Worksite distribution panel AL IP44 Mopsi
Slotted screw pan head DIN 7985
Slotted screw pan head DIN 7985
Terminal block 2001 series 2 conductor TOPJOB® S
Terminal block 2006 series 3 conductor TOPJOB® S
Crimp sleeve WESOS
Cover KRL-RS90 zinc plated, Meka