Blind rivet domed head grooved
Rivet: aluminium. Mandrel: steel, zinc plated A1K.
BLIND RIVET AL/ST GROOV. 3,2X10
With registration you can access the Würth Elektro online shop selection.
- Secure fastening to soft and fibrous materials. On rivet fastening, fibres press into the rivet grooves, ensuring a secure hold.
- Also suited for wood, brick, and concrete connections.
- Rivet does not need through hole.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 10.0 mm |
Head diameter | 6.5 mm |
Head height | 0.8 mm |
Nominal diameter | 3.2 mm |
Length | 10.0 mm |
Mandrel diameter | 1.8 mm |
Drill hole diameter | 3.4 mm |
Shear-fracture load | 700 N |
Tensile fracture load | 1100 N |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Flush-mounted outlet with cover plate IP21 Exxact
Box cover AK20.1
Push button IP20 Jussi
Flush mount bracket Panel PFM 600
Conduit bend JMKL HF 90 degrees
Heat shrink hose 2:1 FRS222
Inductive sensor Embeddable, OsiSense
Cable trunking, Forix adapter For Forix accessory
Hexagon nut, low profile, fine thread
Circuit board support TRMSCBS