Blind rivet flange head open
Rivet: aluminium. Mandrel: steel, zinc plated.
BLIND RIVET AL/ST LARGEHEAD 3,2X6
With registration you can access the Würth Elektro online shop selection.
- For applications where soft, thin, or frail materials are fastened to a sturdy substrate.
- Large head enables larger holes under the head.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 6.0 mm |
Min./max. grip range | 2.0-3.5 mm |
Head diameter | 9.5 mm |
Head height | 1.1 mm |
Nominal diameter | 3.2 mm |
Length | 6 mm |
Mandrel diameter | 1.8 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 750 N |
Tensile fracture load | 1100 N |
Material of sleeve | Aluminium, AlMg 3.5 |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Defogger Adax Neo
Blind rivet flange head open
Surface-mounted junction box Red Range i 12 IP55, plastic
Cable trunk adhesive tape mounting Ultra mini strip Exxact
Wire marker roll 1.5 to 4 mm2 PA series
Spotlight Tracklight Spot
Flush-mounted switch 10AX – 250V IP20 Valena Life
Alarm contactor with short-circuit alarm MS
Fender washer, wing repair washer
LED lamp DULUX D10 LED (CCG/AC)