Blind rivet flange head open
Rivet: aluminium. Mandrel: steel, zinc plated.
BLIND RIVET AL/ST LARGEHEAD 4,8X14
With registration you can access the Würth Elektro online shop selection.
- For applications where soft, thin, or frail materials are fastened to a sturdy substrate.
- Large head enables larger holes under the head.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 14.0 mm |
Min./max. grip range | 4.5-6.0 mm |
Head diameter | 14 mm |
Head height | 1.8 mm |
Nominal diameter | 4.8 mm |
Length | 14 mm |
Mandrel diameter | 2.65 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 1850 N |
Tensile fracture load | 2600 N |
Material of sleeve | Aluminium, AlMg 3.5 |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Motor protection switch MPX3 32H
Hexagonal bolt, full thread
Wing repair washer, large outer diameter
Wing repair washer, large outer diameter
RUBBER SEAL with oval hole
Ceiling bracket TP2 acid-resisting steel, Meka
Slotted screw pan head DIN 7985
Signal cable LIYCY
Hexagon socket screw, cylinder head
Hexagon socket screw, flat round head