Blind rivet Domed head Multifar
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET MULTIFAR A2/A2 3,2X9,0
With registration you can access the Würth Elektro online shop selection.
- Very good mechanical strength and good corrosion resistance.
- Good resistance to vibration.
- Fills oversized pre-holes.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 9.0 mm |
Min./max. grip range | 3.0-5.0 mm |
Head diameter | 6.5 mm |
Head height | 1.0 mm |
Nominal diameter | 3.2 mm |
Length | 9.0 mm |
Mandrel diameter | 2.15 mm |
Drill hole diameter | 3.4 mm |
Tensile fracture load | 2000 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Slotted screw cylinder head ISO 14579
Surface-mounted luminaire IP65 Surface Bulk Head with EM motion detector
Handle-type fuse Mersen
Vehicle protecting tube POLYFLEX PA6 HB
Alarm cable bracket FDC zinc plated, Meka
Combination thermostat ETH-COLOR-WIFI
Hexagon socket screw, flat round head
Pipe clip VBS 2955 OBO
Circuit breaker
Cable routing conduit plastic, Inform