Blind rivet Domed head Multifar
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET MULTIFAR A2/A2 4,0X12,0
With registration you can access the Würth Elektro online shop selection.
- Very good mechanical strength and good corrosion resistance.
- Good resistance to vibration.
- Fills oversized pre-holes.
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 12.0 mm |
Min./max. grip range | 5.0-7.0 mm |
Head diameter | 8.0 mm |
Head height | 1.3 mm |
Nominal diameter | 4.0 mm |
Length | 12.0 mm |
Mandrel diameter | 2.6 mm |
Drill hole diameter | 4.2 mm |
Tensile fracture load | 3000 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
EMC LOCKNUT MS PG EMC, brass nickel plated
Hole drill Unica System+
Circuit board support TRMDLSP3
Taptite DIN 7500-M, countersunk head, thread rolling
Flush-mounted outlet diagonal IP21 Exxact
Wing repair washer, large outer diameter
Taptite DIN 7500-M, countersunk head, thread rolling
Taptite DIN 7500-M, countersunk head, thread rolling
Power cable CU MCMK Prysmian
LED lamp LEDVANCE DULUX D LED (CCG/AC) re TC-D 13W