Blind rivet Domed head Multifar
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET MULTIFAR A2/A2 4,0X7,0
With registration you can access the Würth Elektro online shop selection.
- Very good mechanical strength and good corrosion resistance.
- Good resistance to vibration.
- Fills oversized pre-holes.
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 7.0 mm |
Min./max. grip range | 1.2-3.0 mm |
Head diameter | 8.0 mm |
Head height | 1.3 mm |
Nominal diameter | 4.0 mm |
Length | 7.0 mm |
Mandrel diameter | 2.6 mm |
Drill hole diameter | 4.2 mm |
Tensile fracture load | 3000 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Electrical wire H07Z-K HF 3607
Straight fitting SEM-FAST M
Surface-mounted luminaire IP44 Surface Circular 250 Sensor
Motor protection switch MPX3 32H
Power source Transformer, Wago
Hexagon socket screw, flat cylinder head
Through standoff WESO
Office luminaire Linear IndiviLED Direct/Indirect
Weld stud ISO 13918 UT
Flange bolt, hexagon head, lock toothing