Blind rivet Domed head Multifar
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET MULTIFAR A2/A2 4,8X9,0
With registration you can access the Würth Elektro online shop selection.
- Very good mechanical strength and good corrosion resistance.
- Good resistance to vibration.
- Fills oversized pre-holes.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 9.0 mm |
Min./max. grip range | 1.5-3.5 mm |
Head diameter | 10.0 mm |
Head height | 1.5 mm |
Nominal diameter | 4.8 mm |
Length | 9.0 mm |
Mandrel diameter | 3.2 mm |
Drill hole diameter | 5.1 mm |
Tensile fracture load | 4500 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
HF cable channel with cut-off groove Legrand
Screw set RS 1 Hot dip galvanised, Meka
Downlight Slim Value, IP20
Cable gland T-GET M
Installation conductor H07V2-K MKEM 90
Halogen-free wiring tray cover Legrand
Power cable CU MCMK Prysmian
Heat shrink hose 2:1 FRS222 box
Floor heater cable Cable Kit 200
Spacer screw SIUL ZN