Blind rivet domed head Multigrip
Rivet: stainless steel A2. Mandrel: stainless steel A2.
BLIND RIVET MULTIGRIP A2/A2 4,8X15
With registration you can access the Würth Elektro online shop selection.
- Very wide range of applications for different material strengths.
- Rivet also fills oversized pre-holes.
- Can also be used in softer materials (plastic, composites, aluminium).
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 11.0 mm |
Min./max. grip range | 1.5-9.0 mm |
Head diameter | 10.0 mm |
Head height | 1.8 mm |
Nominal diameter | 4.8 mm |
Length | 11.0 mm |
Mandrel diameter | 3.2 mm |
Drill hole diameter | 5.1 mm |
Shear-fracture load | 4000 N |
Tensile fracture load | 4500 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Last viewed
Spacer screw SIUL ZN
Through standoff WESO
Surface mounting frame downlight Downlight Slim SQ
Circuit board support TRMDLSP3
Hexagon socket screw, flat cylinder head
Connector J Instal
Contactor AF09
Wing repair washer, large outer diameter
Lighting rail T-component TA3A, Unipro
Washer, flat, no chamfer