Blind rivet domed head Multigrip
Rivet: steel. Mandrel: steel, zinc plated.
BLIND RIVET MULTIGRIP ST/ST 4X11
With registration you can access the Würth Elektro online shop selection.
- Very wide range of applications for different material strengths.
- Rivet also fills oversized pre-holes
- Can also be safely used in softer materials (plastic, aluminium, composites)
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 11.0 mm |
Min./max. grip range | 1.5-5.0 mm |
Head diameter | 8.0 mm |
Head height | 1.1 mm |
Nominal diameter | 4.0 mm |
Length | 11.0 mm |
Mandrel diameter | 2.6 mm |
Drill hole diameter | 4.2 mm |
Shear-fracture load | 1900 N |
Tensile fracture load | 2450 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Last viewed
Surface-mounted outlet IP21 Exxact
Flush-mounted switch IP21 Exxact
Hexagon nut, low profile, fine thread
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Motor protection switch MS116
Pendant control case Harmony – XAC-A 2013
Set screw, hex socket, cone point
Pin for limit switch OsiSense
Cover plate 87 mm Exxact
LED strip 24V IP20 Prime Strip Prime Strip