Blind rivet domed head open
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET ST/ST 3,2X8
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 8.0 mm |
Min./max. grip range | 3.0-5.0 mm |
Head diameter | 6.4 mm |
Head height | 1.0 mm |
Nominal diameter | 3.2 mm |
Length | 8.0 mm |
Mandrel diameter | 2.0 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1100 N |
Tensile fracture load | 1200 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Panel luminaire frame Panel PFM 600
Surface mount luminaire Surface Circular IP44 250
Hexagon socket screw, flat round head
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Compression pipe cable lug KR Elpress
Adjustable corner component ALC3, Unipro
Motor protection switch TeSys GV2
Washer, flat, no chamfer
Wire marker roll 0.75 to 4.0 mm2 Helagrip HGDC
Surface-mounted junction box AP9 IP65, plastic