Blind rivet domed head open
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET ST/ST 4,8X10
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 10.0 mm |
Min./max. grip range | 4.0-6.0 mm |
Head diameter | 9.5 mm |
Head height | 1.4 mm |
Nominal diameter | 4.8 mm |
Length | 10.0 mm |
Mandrel diameter | 2.93 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 2900 N |
Tensile fracture load | 3100 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Lighting rail cover plate CP3, Unipro
EMC LOCKNUT MS PG EMC, brass nickel plated
Circuit breaker
Cover plate 85 mm Valena Life
Push button releasable Osmoz
Downpipe Instal
Ethernet CAT6A connector Deltaco
Downpipe Instal
Terminal block 2206 series with push-button 3 conductor GNYE TOPJOB® S
Circuit board support TRBHL1