Blind rivet domed head open
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET ST/ST 4X12
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 12.0 mm |
Min./max. grip range | 6.5-9.0 mm |
Head diameter | 8.0 mm |
Head height | 1.0 mm |
Nominal diameter | 4.0 mm |
Length | 12.0 mm |
Mandrel diameter | 2.4 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 1700 N |
Tensile fracture load | 2200 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Circuit breaker
Motion detector, flush IP21 PIR 120 Exxact
Underfloor thermostat Exxact
Surface mounting frame downlight Downlight Slim DN
Cable trunking, flat angle DLP-S
Slotted cable trunking with cut-off groove Trancab
Defrosting mat Ebeco
Flush-mounted switch IP21 Exxact
Cable routing conduit aluminium, Instal
Washer, flat, no chamfer