Blind rivet domed head open
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET ST/ST 5X40
With registration you can access the Würth Elektro online shop selection.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 5.0 x 40.0 mm |
Min./max. grip range | 30.0-34.0 mm |
Head diameter | 9.5 mm |
Head height | 1.6 mm |
Nominal diameter | 5 mm |
Length | 40 mm |
Mandrel diameter | 2.93 mm |
Drill hole diameter | 5.1 mm |
Shear-fracture load | 3100 N |
Tensile fracture load | 4000 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Circuit board support TRTCBS
Residual current device TX3
Optical smoke alarm SA411S
Energy transfer chain cable EMC HF PUR-C
Deep beam lamp HQL LED HIGHBAY
Washer for cylinder head screws
Charging station Terra AC-W11-G5-R-0
Thread-forming bushing WECLS
Branching nipple Multifix KNH2
Micro socket terminal 2273 series, WAGO