Blind rivet countersunk head open
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET ST/ST COUNTERS. 4,8X12
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 12.0 mm |
Min./max. grip range | 6.0-8.0 mm |
Head diameter | 9.5 mm |
Head height | 1.4 mm |
Head angle | 120 Degree |
Nominal diameter | 4.8 mm |
Length | 12.0 mm |
Mandrel diameter | 2.93 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 2900 N |
Tensile fracture load | 3100 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
LAN cable CAT6 U/UTP HF
Fire retardant junction box AU60.10FR
Earthing connector KNA Ensto
Adapter for DIN bar installation KRL7 35 mm
Defrosting cable Frostvakt 25
Energy transfer chain cable EMC HF PUR-C
Flush-mounted switch IP21 ELKO RS Nordic
Surface-mounted RCD outlet IP21 Impressivo
Downlight IP54 Plano Basic
Slotted screw Pan head ISO 14583