Blind rivet countersunk head open
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET ST/ST COUNTERS. 4,8X8
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 8.0 mm |
Min./max. grip range | 2.5-4.0 mm |
Head diameter | 9.5 mm |
Head height | 1.4 mm |
Head angle | 120 Degree |
Nominal diameter | 4.8 mm |
Length | 8.0 mm |
Mandrel diameter | 2.93 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 2900 N |
Tensile fracture load | 3100 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Electronic ballast CV-DR-PFM
Lighting outlet DCL wall surface Impressivo
Ladder shelf KS20 hot dip galvanised, Meka
Motion detector, flush IP21 PIR 120 Exxact
Flush-mounted switch IP21 Impressivo
Connected Energy Meter with Netatmo
CONDUCTOR TAG STRIP 0.5–1.5 MM2 Black letters on a yellow background
Cable trunk adhesive tape mounting Ultra mini strip Exxact
Blind rivet domed head open
Fender washer, wing repair washer