Blind rivet countersunk head open
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET ST/ST COUNTERS. 4X8
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- A low-cost fastening method for applications without particularly sizeable load-bearing requirements.
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 8.0 mm |
Min./max. grip range | 3.0-5.0 mm |
Head diameter | 7.6 mm |
Head height | 1.3 mm |
Head angle | 120 Degree |
Nominal diameter | 4.0 mm |
Length | 8.0 mm |
Mandrel diameter | 2.4 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 1700 N |
Tensile fracture load | 2200 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Terminal block ZS16 SNK series
Corner component Instal
Surface junction box Exxact IP20, plastic
Washer, flat, no chamfer
Plastic cabinet Atlantic
Downlight Downlight Slim, IP20
Circuit board support TRMDLSP3
Slotted screw cylinder head DIN 84
LED strip 24V IP20 Prime Strip Prime Strip
Charging station load management control unit EVlink Home Peak Controller 1-phase