Blind rivet countersunk head closed
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET ST/ST COUNTS SEALED 3,2X9,1
With registration you can access the Würth Elektro online shop selection.
- For applications requiring countersinking the rivet to the surface level.
- For applications requiring a sealed connection where the feed shaft must not come loose.
- dust and pressure proof.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 9.1 mm |
Min./max. grip range | 1.0-4.5 mm |
Head diameter | 5.9 mm |
Head height | 1.0 mm |
Head angle | 120 Degree |
Nominal diameter | 3.2 mm |
Length | 9.1 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1100 N |
Tensile fracture load | 1200 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Fender washer, wing repair washer
Cable entry flange FL13 D-A-F
Space-saving end connector 262 series, WAGO
Weld stud ISO 13918 PT
Final circuit board enclosure flush/surface Ensto
Terminal block KEVI 260 series, WAGO
Rail mounting support Ensto
Slotted cable trunking ECS
Hexagon socket screw, cylinder head
Time relay Hager, off-delay