Blind rivet flange head open
Rivet: steel, zinc plated A3K. Mandrel: steel, zinc plated A1K.
BLIND RIVET ST/ST LARGEHEAD 4,8X10
With registration you can access the Würth Elektro online shop selection.
- For applications where soft, thin, or frail materials are fastened to a sturdy substrate.
- Large head enables larger holes under the head.
Datasheets(X)
 | |
Nominal diameter x length | 4.8 x 10.0 mm |
Min./max. grip range | 4.0-6.0 mm |
Head diameter | 14.0 mm |
Head height | 2.1 mm |
Nominal diameter | 4.8 mm |
Length | 10.0 mm |
Mandrel diameter | 2.93 mm |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 2900 N |
Tensile fracture load | 3100 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Mounting plate Cubo O/C
Motor protection switch MPX3 32H
Electronic ballast CV-DR-PFM
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Defrosting mat Ebeco
Compressed crimp cable lug
Lighting rail cover plate CP3, Unipro
Hexagon socket screw, cylinder head
Downlight Slim SQ, IP20
T-manifold for protective pipe