Blind rivet flange head open
Rivet: steel, zinc plated A3K. Mandrel: steel, zinc plated A1K.
BLIND RIVET ST/ST LARGEHEAD 4X10
With registration you can access the Würth Elektro online shop selection.
- For applications where soft, thin, or frail materials are fastened to a sturdy substrate.
- Large head enables larger holes under the head.
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 10.0 mm |
Min./max. grip range | 5.0-6.5 mm |
Head diameter | 10.0 mm |
Head height | 1.5 mm |
Nominal diameter | 4.0 mm |
Length | 10.0 mm |
Mandrel diameter | 2.4 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 1700 N |
Tensile fracture load | 2200 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Linear luminaire IP44 Linear Surface Gen 2
Welding nut, square
Circuit board support TRBHL1
Safety switch OTP
Flange bolt, hexagon head, lock toothing
Defogger Adax Neo
Cable tie TWIST LOCK natural TRSTL-6
Residual current device outlet, flush IP44, Kosti
Enclosed industrial luminaire Damp Proof Classic, IP65
Heater mat Thermoflex Kit 500