Blind rivet domed head closed
Rivet: steel, zinc plated. Mandrel: steel, zinc plated A3K / uncoated.
BLIND RIVET ST/ST SEALED 3,2X9,5
With registration you can access the Würth Elektro online shop selection.
- For applications requiring a sealed connection where the feed shaft must not come loose.
- Dust and pressure proof.
- Suitable for many applications.
Datasheets(X)
 | |
Nominal diameter x length | 3.2 x 9.5 mm |
Min./max. grip range | 3.0-5.0 mm |
Head diameter | 6.5 mm |
Head height | 1 mm |
Nominal diameter | 3.2 mm |
Length | 9.5 mm |
Mandrel diameter | 1.9 mm |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1150 N |
Tensile fracture load | 1300 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Suspension hook SH, Unipro
Push button releasable Osmoz
High-bay luminaire IP65 High Bay Gen 4
Spiral binding, cable protector, standard
Disconnect/test terminal block 2007 series TOPJOB® S
Residual current device F200
Hexagon nut, low profile, fine thread
Circuit board support TRPSM
Slotted screw ISO 14580
Terminal block 2002 series triple-deck 2 conductor TOPJOB® S