Blind rivet domed head TAMP
Rivet: steel, zinc plated. Mandrel: steel, zinc plated.
BLIND RIVET TAMP FAR ST/ST 4,0X9,0
Art.-no. WM081149
EAN 6438190743669
With registration you can access the Würth Elektro online shop selection.
- Very good mechanical strength.
- Good resistance to vibration.
- Fills oversized pre-holes.
Datasheets(X)
 | |
Nominal diameter x length | 4.0 x 9.0 mm |
Min./max. grip range | 3.0-5.0 mm |
Head diameter | 8.0 mm |
Head height | 1.3 mm |
Nominal diameter | 4.0 mm |
Length | 9.0 mm |
Mandrel diameter | 2.7 mm |
Drill hole diameter | 4.2 mm |
Tensile fracture load | 2200 N |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
Last viewed
Enclosed industrial luminaire Damp Proof Classic, IP65
Insulating electrical tape Scotch® Super
Surface-mounted frame low IP44 30/85 Exxact
Taptite DIN 7500-M, countersunk head, thread rolling
Enclosed industrial luminaire Damp Proof Value, IP65
Lock washer, type B
Cable trunking, screw mounting, WDK
Plastofast, pan head
Installation conductor H05V2-K MKJ 90