Crimp sleeve WEBSO4
WEBSO4 – Closed / Threaded – Stainless steel 400 series
BLIND STANDOFF WEBSO4 A2/400 M3-3,5X10
With registration you can access the Würth Elektro online shop selection.
Crimp sleeves are spacing or intermediate sleeves mounted in thin plate.
When compressing the fastening element in place, the hexagon head sinks into the thin plate and shapes the material into the thread below, ensuring a durable hold.
There is a large selection of dimensions and models for crimp sleeves. There are threaded, non-threaded, open (through hole), and closed (blind) models.
Benefits
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Length | 10.0 mm |
Nominal diameter | 3 mm |
Material | Stainless steel A2 |
Surface | Uncoated |
Last viewed
Enclosed industrial luminaire Damp Proof Classic Dali, IP65
Damp proof industrial luminaire Damp Proof Classic Emergency, IP65
Slotted cable trunking with cut-off groove Trancab
Contactor CTX3 100
Cap nut, hexagon, high profile
Circuit board support TRMSP
Cable tie TWIST LOCK natural TRTL
Circuit breaker
Wall luminaire IP44, Dana FTLight
Hexagon socket screw, cylinder head