Crimp sleeve WEBSO4
WEBSO4 – Closed / Threaded – Stainless steel 400 series
BLIND STANDOFF WEBSO4 A2/400 M3X18
With registration you can access the Würth Elektro online shop selection.
Crimp sleeves are spacing or intermediate sleeves mounted in thin plate.
When compressing the fastening element in place, the hexagon head sinks into the thin plate and shapes the material into the thread below, ensuring a durable hold.
There is a large selection of dimensions and models for crimp sleeves. There are threaded, non-threaded, open (through hole), and closed (blind) models.
Benefits
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Length | 18.0 mm |
Nominal diameter | 3 mm |
Material | Stainless steel A2 |
Surface | Uncoated |
Last viewed
Charging station load management control unit EVlink Home Peak Controller 1-phase
Installation conductor H07V2-K MKEM 90
Rivet nut
Office luminaire Linear IndiviLED Direct/Indirect
Cable trunking, screw mounting, WDK
Downlight Slim SQ, IP20
Lock washer, type B
Alarm contactor MS
Motion sensor Valena
Blind rivet flange head open