Crimp sleeve WEBSOS
BLIND STANDOFF WEBSOS A2 M2,5X12
With registration you can access the Würth Elektro online shop selection.
Crimp sleeves are spacing or intermediate sleeves mounted in thin plate.
When compressing the fastening element in place, the hexagon head sinks into the thin plate and shapes the material into the thread below, ensuring a durable hold.
There is a large selection of dimensions and models for crimp sleeves. There are threaded, non-threaded, open (through hole), and closed (blind) models.
Benefits
 | |
Thread type x nominal diameter | M2.5 |
Length | 12.0 mm |
Nominal diameter | 2.5 mm |
Material | Stainless steel A2 |
Surface | Uncoated |
Datasheets(X)
Last viewed
Plastofast, pan head
Cylindrical pin, unhardened
Signal cable FLEX-JZ
Electrical wire H07V2-K MULTINORM UL1015
Mounting carrier for DIN rail 221-series WAGO
Slotted cable trunking with cut-off groove Trancab
Neutral bar N and PE bars with 16 mm2 pillar terminals, Ensto
3-phase conductor rail system MS
Surface-mounted corner box 60/85mm Impressivo
Lock washer, type B